View N-P-5W-NICAU-CF_8511509.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

n series 151222 n style coaxial connector feature ? n series is a thread coupling coaxial connector which isthe most popular as a 7mm type 50 impedance. ? n series is available for various cable type. ? it is incompatible to nc series(75 impedance n style connector). frequency range dc to 3ghz 50 lock type characteristic impedance screw characteristic impedance 50 rated volatge 500vac(r.m.s.) dielectric withstanding voltage 1,500v ac(r.m.s) / 1 minute insulation resistance 1,000m min. at 500v dc contact resistance 3m max. v.s.w.r. 1.3 max. (dc ? 3ghz) operating temperature -55 ? +85 3p)4 $pnqmjbou 3p)4 $pnqmjbou *ufn .bufsjbm'jojti 4ifmm $pqqfs"mmpz/jps"h1mbujoh $poubdu 'fnbmf
$pqqfs"mmpz"hps"v1mbujoh $poubdu .bmf
$pqqfs"mmpz"hps"v1mbujoh *otvmbups 15'& (btlfu 4jmjdpo3vccfs specifications material/finish the specifcations are typical but may not apply to all connectors. please check the specifcations on each item with its drawing from us when you use. also, the performance is difrenet by using cable. conforming standard jis-c5411,mil-prf-39012 http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
2 straight cable plug n-p-3 l a 21 n-p-5 21 l a n-p-8-1 ?n-p-5d2v-cr20? 21 38.0 a n-p-10 a a 51.7 21 21 l 40% 80 n-p-3 l a 21 n-p-5 1 n-p-8-1 ?n-p-5d2v-cr20? 21 38.0 a n-p-10 a a 51.7 21 21 l 40% 80 clamp type part number applicable cable a l finish assembly instruction outer conductor center conductor n-p-3-cf 3c-2v 6.2 44.6 ag ag 1 3d-2v n-p-3-ni-cf 3c-2v 6.2 44.6 ni ag 1 3d-2v n-p-3-nicau-cf 3c-2v 6.2 44.6 ni au 1 3d-2v n-p-3w-cf 3c-2w 7.2 44.6 ag ag 1 3d-2w n-p-3w-ni-cf 3c-2w 7.2 44.6 ni ag 1 3d-2w n-p-3w-d1-cf 3c-2w 7.2 44.6 ni au 1 3d-2w n-p-55u-cf rg-55/u 5.4 44.6 ag ag 1 n-p-55u-ni-cf rg-55/u 5.4 44.6 ni ag 1 n-p-58u-cf rg-58/u 5.4 44.6 ag ag 1 n-p-58u-ni-1-cf rg-58/u 5.4 44.6 ni ag 1 n-p-58u-nicau-cf rg-58/u 5.4 44.6 ni au 1 part number applicable cable a l finish assmbly instruction outer conductor center conductor n-sp-3.5dfe-cf 3.5d-fe 6.2 41.5 ni au ` 3.5d-qefa n-p-5-cf 5c-2v 8.6 44.0 ag ag 1 5d-2v n-p-5-ni-cf 5c-2v 8.6 44.0 ni ag 1 5d-2v n-p-5w-cf 5c-2w 9.1 45.0 ag ag 1 5d-2w n-p-5w-ni-cf 5c-2w 9.1 45.0 ni ag 1 5d-2w N-P-5W-NICAU-CF 5c-2w 9.1 45.0 ni au 1 5d-2w n-p-5dfb-1-cf 5d-fb 8.1 44.0 ni ag 1 n-sp-5dsfa-cf 5d-sfa 8.6 41.5 ni au ` n-p-8u-cf rg-8/u 11.2 44.0 ag ag 1 rg-9/u n-p-8u-ni-cf rg-8/u 11.2 44.0 ni ag 1 rg-9/u ug-21d/u-cf rg-8/u 11.25 38.0 ag ag 2 rg-9/u unitmm nseries http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
straight plug 3 clamp type n-p-3 l a 21 n-p-5 21 l a n-p-8-1 ?n-p-5d2v-cr20? 21 38.0 a n-p-10 a a 51.7 21 21 l 40% 80 n-p-3 l a 21 n-p-5 21 l a n-p-8-1 n-p-5-0 1 380 n-p-10 51 1 1 40% 80 part number applicable cable a finish assembly instruction outer conductor center conductor n-p-8-1-cf 8d-2v 12.6 ag ag 4 n-p-8-1-ni-cf 8d-2v 12.6 ni ag 4 n-p-8dfb-1-cf 8d-fb 11.8 ni ag 4 part number applicable cable a finish assembly instruction outer conductor center conductor n-p-10-cf 10c-2v 14.2 ag ag 4 10d-2v n-p-ni-cf 10c-2v 14.2 ni ag 4 10d2v n-p-10dfb-1-cf 10d-fb 14.2 ni ag 4 6ojunn /y4fsjft iuuqxxxeelofudpkq ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
right angle cable plug 4 clamp type n-lp-58u l1 (l2) 17.5 a 21 a 21 (l2) l1 n-lp-8u 21 (34.9) 47.0 11.2 17.5 ? n-j-3 n-j-5 n-j-8 n-j-10 46 a l a a b l 52.7 a b n-lp-58u l1 (l2) 17.5 a 21 a 21 (l2) l1 n-lp-8u 21 (34.9) 47.0 11.2 17.5 ? n-j-3 n-j-5 n-j-8 n-j-10 46 a l a a b l 52.7 a b n-lp-58u l1 (l2) 17.5 a 21 a 21 (l2) l1 n-lp-8u 1 3 0 11 15 ? n-j-3 n-j-5 n-j-8 n-j-10 46 a l a a b l 52.7 a b part number applicable cable a (l1) l2 finish assembly instruction outer conductor center conductor n-lp-58u-cf rg-58/u 5.4 52.9 36.6 ag ag ` n-lp-58u-ni-cf rg-58/u 5.4 52.9 36.6 ni ag ` part number applicable cable a l1 (l2) finish assembly instruction outer conductor center conductor n-lp-5-cf 5d-2v 8.6 53.0 36.6 ag ag ` n-lp-5-ni-cf 5d-2v 8.6 53.0 36.6 ni ag ` part number applicable cable finish assembly instruction outer conductor center conductor n-lp-8u-cf rg-8u ag ag ` rg-9/u n-lp-8u-ni-cf rg-8u ni ag ` rg-9/u unitmm nseries http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
straight cable jack 5 n-lp-58u l1 (l2) 17.5 a 21 a 21 (l2) l1 n-lp-8u 21 (34.9) 47.0 11.2 17.5 ? n-j-3 n-j-5 n-j-8 n-j-10 46 a l a a b l 52.7 a b n-lp-58u l1 (l2) 17.5 a 21 a 21 (l2) l1 n-lp-8u 21 (34.9) 47.0 11.2 17.5 ? n-j-3 n-j-5 n-j-8 n-j-10 46 a l a a b l 52.7 a b n-lp-58u l1 (l2) 17.5 a 21 a 21 (l2) l1 n-lp-8u 21 (34.9) 47.0 11.2 17.5 ? n-j-3 n-j-5 n-j-8 n-j-10 46 a l a a b l 52.7 a b n-lp-58u l1 (l2) 17.5 a 21 a 21 (l2) l1 n-lp-8u 21 (34.9) 47.0 11.2 17.5 ? n-j-3 n-j-5 n-j-8 n-j-10 46 a l a a b l 52.7 a b clamp type part number applicable cable a finish assembly instruction outer conductor center conductor n-j-3-cf 3c-2v 6.2 ag ag 2 3d-2v n-j-3-ni-cf 3c-2v 6.2 ni ag 2 3d-2v n-j-58u-cf rg-58/u 5.4 ag ag 2 n-j-58u-ni-cf rg-58/u 5.4 ni ag 2 part number applicable cable a b finish assembly instruction outer conductor center conductor n-j-10-cf 10c-2v 14.2 22.2 ag ag 5 10d-2v n-j-10-ni-cf 10c-2v 14.2 22.2 ni ag 5 10d-2v n-j-10dfb-1-cf 10d-fb 14.2 22.2 ni ag 5 part number applicable cable a (l) finish assembly instruction outer conductor center conductor n-j-5-cf 5d-2v 8.6 47.0 ag ag 2 n-j-5-ni-cf 5d-2v 8.6 47.0 ni ag 2 n-j-8u-cf rg-8/u 11.2 47.0 ag ag 2 rg-9/u n-j-8u-ni-cf rg-8/u 11.2 47.0 ni ag 2 rg-9/u part number applicable cable a b (l) finish assembly instruction outer conductor center conductor n-j-8-1-cf 8d-2v 12.7 19.1 41.2 ag ag 5 n-j-8-1-ni-cf 8d-2v 12.7 19.1 41.2 ni ag 5 ug-23d/u-cf rg-8/u 11.2 19.0 40.0 ag ag 5 rg-9/u 6ojunn /y4fsjft iuuqxxxeelofudpkq ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
straight panel cable jack n-pj-3?? n-pj-5? n-r? 18.2 0.05 25.4 46 a 17.5 c c a b 2.0 4-3.2 18.2 0.05 17.8 +0.1 0 4-3.2 +0.1 0 c 2.0 b a 47 25.4 d d 18.2 18.2 25.4 18.7 l 14.6 2 4-3.2 4-a 18.24 0.05 18.24 0.05 18.2 0.05 18.2 0.05 18.0 +0.1 0 4-3.2 +0.1 0 4-3.2 +0.1 0 15.0 +0.1 0 n-pj-3?? n-pj-5? n-r? 5 5 5 -3 5 -3 5 5 -3 - 5 5 5 5 -3 -3 5 n-pj-3?? n-pj-5? n-r? 18.2 0.05 25.4 46 a 17.5 c c a b 2.0 4-3.2 18.2 0.05 17.8 +0.1 0 4-3.2 +0.1 0 c 2.0 b a 47 25.4 d d 18.2 18.2 25.4 18.7 l 14.6 2 4-3.2 4-a 18.24 0.05 18.24 0.05 18.2 0.05 18.2 0.05 18.0 +0.1 0 4-3.2 +0.1 0 4-3.2 +0.1 0 15.0 +0.1 0 n-pj-3?? n-pj-5? n-r? 18.2 0.05 25.4 46 a 17.5 c c a b 2.0 4-3.2 18.2 0.05 17.8 +0.1 0 4-3.2 +0.1 0 c 2.0 b a 47 25.4 d d 18.2 18.2 25.4 18.7 l 14.6 2 4-3.2 4-a 18.24 0.05 18.24 0.05 18.2 0.05 18.2 0.05 18.0 +0.1 0 4-3.2 +0.1 0 4-3.2 +0.1 0 15.0 +0.1 0 6 part number applicable cable a b c finish assembly instruction outer conductor center conductor n-pj-3-cf 3c-2v 6.2 16.7 18.2 ag ag 3 3d-2v n-pj-3-ni-cf 3c-2v 6.2 16.7 18.2 ni ag 3 3d-2v n-pj-55u-cf rg-55/u 5.4 16.6 18.2 ag ag 3 n-pj-55u-ni-cf rg-55/u 5.4 16.6 18.2 ni ag 3 n-pj-58u-cf rg-58/u 5.4 16.6 18.2 ag ag 3 n-pj-58u-ni-cf rg-58/u 5.4 16.6 18.2 ni ag 3 part number applicable cable a b c d finish assembly instruction outer conductor center conductor n-pj-5-cf 5c-2v 8.6 17.5 16.7 18.24 ag ag 3 5d-2v n-pj-5-ni-cf 5d-2v 8.6 17.5 16.7 18.24 ni ag 3 panel mounting dimensions panel mounting dimensions unitmm nseries http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
7 receptacle jack n-pj-3?? n-pj-5? n-r? 18.2 0.05 25.4 46 a 17.5 c c a b 2.0 4-3.2 18.2 0.05 17.8 +0.1 0 4-3.2 +0.1 0 c 2.0 b a 47 25.4 d d 18.2 18.2 25.4 18.7 l 14.6 2 4-3.2 4-a 18.24 0.05 18.24 0.05 18.2 0.05 18.2 0.05 18.0 +0.1 0 4-3.2 +0.1 0 4-3.2 +0.1 0 15.0 +0.1 0 n-pj-3?? n-pj-5? n-r? 18.2 0.05 25.4 46 a 17.5 c c a b 2.0 4-3.2 18.2 0.05 17.8 +0.1 0 4-3.2 +0.1 0 c 2.0 b a 47 25.4 d d 18.2 18.2 25.4 18.7 l 14.6 2 4-3.2 4-a 18.24 0.05 18.24 0.05 18.2 0.05 18.2 0.05 18.0 +0.1 0 4-3.2 +0.1 0 4-3.2 +0.1 0 15.0 +0.1 0 panel mounting dimensions dust cap 60 71 (19.5) (19.3) 5/8-24unef-2b 11.1 5/8-24unef-2b 3.5 part number finish n-rc-5 ni n-rc-5-d1 ag part number finish n-rc-3-cf ni part number l finish a outer conductor center conductor n-r-cf 29 ag ag 3.2 n-r-ni-cf 29 ni ag 3.2 n-r-nicau-cf 29 ni au 3.2 ug-58a/u-cf 29 ag ag 3.2 6ojunn /y4fsjft iuuqxxxeelofudpkq ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
nut washer gasket contact clamp washer insulator body l1 15mm clamp sheath outer conductor gasket washer nut 5.0mm 3.54.0mm 3.5mm canter conductor pre-soldering insulator pick the outer conductor and turn down to the clamp equally. soldering contact no gap washer insulator washer insulator nut washer gasket contact clamp washer insulator body l1 15mm clamp sheath outer conductor gasket washer nut 5.0mm 3.54.0mm 3.5mm canter conductor pre-soldering insulator pick the outer conductor and turn down to the clamp equally. soldering contact no gap washer insulator washer insulator l= the cable length require for the single-ended cable assembly. l=l1-10 assembly instruction(1) straight cable plug 8 parts confgulration insert the nut, washer and gasket into the cable. cut the sheath 15mm from the end of the cable and insert the clamp. please be careful to not damage the outer conductor. pick the outer conductor and turn down to the clamp. cut the outer conductor along the clamp. cut the insulator and center conductor as fg.3. please be careful to not damage the center conductor. insert the ring and insulator as fg. 5. in case of the insulator which has directivity, insert the insulator as below direction and ft the thinner side of the insulator into the inside diameter of the washer. solder up the contact with the center conductor. please be careful to not deform the insulator by heat. when the solder is stick out, please shave the extra solder. no gap between contact and insulator of the cable. insert the above assembly into the body and screw up by wrench. applicable cable recommended tightening torque 3c-2v, 3d-2v, 3c-2w,3d-2w, rg-55/u, rg-58/u 196 ? 392n?cm(20 ? 40kgf?cm) 5c-2v, 5d-2v 392n?cm(40kgf?cm) 5c-2w, 5d-2w 490 ? 686n?cm(50 ? 70kgf?cm) 5d-fb 441 ? 539n?cm(45 ? 55kgf?cm) rg-8/u, rg-9/u 343 ? 392n?cm(35 ? 40kgf?cm) unitmm nseries http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
9 assembly instruction(2) straight cable jack nut washer gasket clamp contact washer insulator body l 1 15mm 3.54mm 3.5mm pre-soldering cable nut washer gasket outer conductor clamp insulator center conductor soldering contact no gap washer insulator 5 mm insulator washer nut washer gasket clamp contact washer insulator body l 1 15mm 3.54mm 3.5mm pre-soldering cable nut washer gasket outer conductor clamp insulator center conductor soldering contact no gap washer insulator 5 mm insulator washer insert the nut, washer and gasket into the cable. cut the sheath 15mm from the end of the cable and insert the calmp. please be careful to not damage the outer conductor . parts confgulration l= the cable length require for the single-ended cable assembly. l=l1-12 pick the outer conductor and turn down to the clamp. cut the outer conductor along the clamp. cut the insulator and center conductor as fg.3. please be careful to not damage the center conductor. solder up the contact with the center conductor. please be careful to not deform the insulator by heat. when the solder is stick out, please shave the extra solder. no gap between contact and insulator of the cable. insert the above assembly into the body and screw up by wrench. insert the ring and insulator as fg. 5. in case of the insulator which has directivity, insert the insulator as below direction and ft the thinner side of the insulator into the inside diameter of the washer. applicable cable recommended tightening torque 3c-2v, 3d-2v, rg-58/u, 196 ? 392n?cm(20 ? 40kgf?cm) 5d-2v 490 ? 686n?cm(50 ? 70kgf?cm) rg-8/u,rg-9/u 343 ? 392n?cm(35 ? 40kgf?cm) 6ojunn /y4fsjft iuuqxxxeelofudpkq ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
assmbly instruction(3 straight panel jack nut washer gasket clamp contact washer insulator body 15 mm 3.54mm 3.5mm 5mm pre-soldering) cable nut washer gasket outer conductor clamp insulator center conductor soldering contact no gap washer insulator l 1 l 2 insulator washer nut washer gasket clamp contact washer insulator od 15 mm 3.54mm 3.5mm 5mm pre-soldering) cable nut washer gasket outer conductor clamp insulator center conductor soldering contact no gap washer insulator l 1 l 2 insulator washer 10 l= the cable length require for the single-ended cable assembly. l=l 1 -6.7 l=-l 2 -1.2 parts confgulration insert the nut, washer and gasket into the cable. cut the sheath 15mm from the end of the cable and insert the clamp. please be careful to not damage the outer conductor. pick the outer conductor and turn down to the clamp. cut the outer conductor along the clamp. cut the insulator and center conductor as fg.3. please be careful to not damage the center conductor. solder up the contact with the center conductor. please be careful to not deform the insulator by heat. when the solder is stick out, please shave the extra solder. no gap between contact and insulator of the cable. insert the above assembly into the body and screw up by wrench. recommended tightening torque 196 ? 392n?cm(20 ? 40kgf?cm) insert the ring and insulator as fg. 5. in case of the insulator which has directivity, insert the insulator as below direction and ft the thinner side of the insulator into the inside diameter of the washer. unitmm nseries http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.
assembly instruction(4 mil clamp straigh cable plug nut gasket clamp contact body clamp sheath outer conductor gasket nut center conductor pre-soldering insulator tip the outer conductor and turn down to the clamp equally. b a soldering contact no gap washer washer l 1 l 2 c nut gasket clamp contact body clamp sheath outer conductor gasket nut center conductor pre-soldering insulator tip the outer conductor and turn down to the clamp equally. b a soldering contact no gap washer washer l 1 l 2 c insert the above assembly into the body and screw up by wrench. as for n-p-8-1-cf, n-p-8-1-ni-cf, ug-21d/u-cf and n-p-8dfb-1-cf washer is not attached. the washer is not inserted into the cable. 11 parts confgulration the cable length require for the single-ended cable assembly as following table. insert the nut, washer and gasket into the cable. cut the sheath from the end of the cable and insert the clamp. please be careful to not damage the outer conductor. pick the outer conductor and turn down to the clamp. cut the outer conductor along the clamp. cut the insulator and center conductor as fg.3. please be careful to not damage the center conductor. solder up the contact with the center conductor. please be careful to not deform the insulator by heat. when the solder is stick out, please shave the extra solder. no gap between contact and insulator of the cable. applicable cable recommended tightening torque rg-8/u, rg-9/u 196 ? 392n?cm(20 ? 40kgf?cm) 8d-2v 294 ? 392n?cm(30 ? 40kgf?cm) 8d-fb 294n?cm(30kgf?cm) 10c-2v, 10d-2v 980n?cm(100kgf?cm) 10d-fb 294n?cm(30kgf?cm) part number lmm l 2 (mm) n-p-8-1-cf l 1 `11.4 10 n-p-8-1-ni-cf ug-21d/u-cf n-p-10-cf l 1 `21.5 n-p-10-ni-cf n-p-10dfb-1-cf n-p-8dfb-1-cf l 1 -14.2 13 part number amm bmm c(mm) n-p-8-1-cf n-p-8-1-ni-cf ug-21d/u-cf 1.0 3.5 ? 4.0 5 n-p-10-cf n-p-10-ni-cf n-p-10dfb-1-cf 1.8 4.0 ? 4.5 n-p-8dfb-1-cf 1.8 3.5 ? 4.0 4.5 6ojunn /y4fsjft iuuqxxxeelofudpkq ? 1mfbtfbdlopxmfehfuibuuiftqfdjpdbujpofudpguijtdbubmphnjhiudibohfczuifjnqspwfnfoufudxjuipvuopujdf y.psfpwfs uifdibsbdufsjtujdboeuiftqfdjpdbujpopguifqvcmjtifeqspevdubsfuifsfgfsfodfwbmvft y1mfbtfdpopsnuifdpoufouxjuiuifmbuftuefmjwfsztqfdjpdbujpotxifozpvvtfuifqspevdu
assembly instruction(5 mil clamp straight cable jack nut gasket calmp contact body l 1 sheath outer conductor clamp gasket nut 5 mm b outer conductor insulator pick the outer conductor and turn down to the clamp equally/ soldering contact no gap 10mm pre-soldering washer a washer nut gasket calmp contact body eat uteconducto clamp gasket nut mm b uteconducto nsulato ckteouteconductoand tundontoteclampeually olden contact noap mm esolden ase a washer 12 part number amm bmm n-j-8-1-cf n-j-8-1-ni-cf ug-23d/u-cf 1.0 3.5 ? 4.0 n-j-10-cf n-j-10-ni-cf n-j-10dfb-1-cf 1.8 4.0 ? 4.5 part number lmm n-j-8-1-cf l 1 `13.2 n-j-8-1-ni-cf ug-23d/u-cf l 1 `13.8 n-j-10-cf l 1 `23.4 n-j-10-ni-cf n-j-10dfb-1-cf as for n-j-8-1-cf, n-j-8-1-ni-cf and ug-23d/u-cf, the washer is not attached. the washer is not inserted into the cable. parts confgulration insert the above assembly into the body and screw up by wrench. the cable length require for the single-ended cable assembly as following table. insert the nut, washer and gasket into the cable. cut the sheath 10mm from the end of the cable and insert the clamp. please be careful to not damage the outer conductor. pick the outer conductor and turn down to the clamp. cut the outer conductor along the clamp. cut the insulator and center conductor as fg.3. please be careful to not damage the center conductor. solder up the contact with the center conductor. please be careful to not deform the insulator by heat. when the solder is stick out, please shave the extra solder. no gap between contact and insulator of the cable. applicable cable recommended tightening torque 8d-2v, rg-8/u, rg-9/u 294 ? 392n?cm(30 ? 40kgf?cm) 10c-2v, 10d-2v 980n?cm(100kgf?cm) 10d-fb 294n?cm(30kgf?cm) unitmm nseries http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product.

▲Up To Search▲

Price & Availability of N-P-5W-NICAU-CF

	To Download N-P-5W-NICAU-CF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .